£174.99 inc postage
NEW 6 X WIRELESS INTERLINKED RADIO FREQUENCY SMOKE ALARM You can add more & more detectors
Power Supply: 9V DC Battery * Photoelectric Sensor * Radio Frequency: 433.92 MHz * Range: 50 meters (min) in free space * Maximum Link Number: 20PCS * Two-Tone LED: Red LED Indicates Alarm Green LED Indicates Radio Signal is Received * ”Battery Missing” Lockout * Low Battery Alarm * High Sensitivity * Humidity Range: 15% to 95% RH * Operating Temperature: -10¡æ to +50¡æ * Built-in Sounder to give a minimum sound output of 85dB at 3m * Senses Smoke Using the light Scatter Principle * Quick Response to Visible Smolding Smoke * Test Button Simulates Smoke–Use to Check Performance * Standby Current: £¼40uA * Alarm Current: £¼30mA
Installation Guide:
£65.49 inc postage Y5-NEW WIRELESS TWIN INTERLINKED RADIO FREQUENCY SMOKE ALARM You can add more & more detectors
£6.99 inc postage
Y3-NEW WIRELESS IONIZATION GENARAL PURPOSE SMOKE ALARM
# Ionization Sensing Chamber # Alarm Test Button # Low Battery Warning # Ionization Technology # 9V Includes Battery # No Need To Wire # Easy to install with mounting hardware included # Test button for easy recommended monthly testing # Loud 85db alarm signal
OUT OF STOCK COMPLETE HMO SMOKE & HEAT WIRELESS FIRE ALARM SYSTEM SUITABLE WORLDWIDE
This fire alarm set comes with Main Unit/built in siren & autodial facility of up to 6 numbers 6x wireless Smoke detectors 2x Break glass call points 2x Wireless Sirens+power adapters 2x Heat detectors 2x Master keyfobs Batteries, Instructions & fittings Power adapters The system is an ‘easy to install’ system
How does the system work:
When smoke/heat is detected the detectors send a signal to the main unit which sounds its internal siren, dials up to 6 numbers & also sounds the two extra wireless sirens- so everyone is alerted of the danger of fire!
The main unit All the accessories are already programmed to the main unit The unit has LCD display, backup battery, built in siren & many features, Its fully expandable so we can add more accessories ranging from smoke detectors, heat detectors, carbon monoxide detectors, breakglass call points, extra sirens, extra fobs, etc
Locate a suitable place for the main unit, ensuring that there is a power socket available. Plug the system in and switch in ON.
Set phone numbers Press ‘telephone’ button & enter password ‘default is xxxx’, the system will show ‘1’ press ‘backspace’ & enter the telephone/mobile number then press ‘confirm’. You can use the down button to scroll through to slot number 2,3,4,5 & 6. You don’t have to program 6 numbers if you dont want to If you need to cancel any numbers just repeat the above & overwrite the number you want to replace
Record outgoing voice This is basically the announcement the system will make when it calls the pre-programmed numbers. Press ‘telephone’ & input the password & press ‘6’ the system will display ‘REC’. Wait for the system to count down from 5 to zero & then speak clearly. (you have 10 seconds recording time)
Set time & date Press ‘setup’ & enter password, then press ‘0’. The year setup entry will appear, enter the correct year & then the month & date setup will follow automatically. Simply enter the month & date & press ‘setup’
Change password
The default password of xxxx is easy to remember but if you want to change it, press ‘setup’ & enter password, then press ‘5’ & the password 1234 will appear. Use the ‘backspace’ button & change the password, then press ‘confirm’ to exit & save. Press ‘setup’ to return to normal screen
Check alarm records Press’ record’ & enter password, the screen will show a number. That number represents the amount of records the system is holding. It can hold up to 100records. To check each detailed record, press the up/down arrows Operating the system After you have fixed all the accessories, you can arm the system using the provided keyfobs (press LOCK) or by pressing the LOCK button on the main unit. The alarm will beep and it will show ARM on the screen. You can test the system by pressing the ‘test’ button on the smoke detector. The system will go OFF & you need to press the UNLOCK button on the keyfob to disarm it. In case of emergency, you can use the ‘break glass call point’ or the PANIC button on the keyfob/main unit Fixing the sirens The sirens receive a wireless signal from the detectors. Locate them near sockets as they need power supply. You can stop these sirens from sounding using the keyfobs. These get a signal from the main unit & they respond to signals from the ‘break glass’ , the keyfobs & the detectors It’s that easy! * No interference Guaranteed each alarm has unique code Suitable for home & business use We can supply extra detectors/break glass/sirens/gas leakage detectors/keyfobs/etc please enquire if you need any extras NICE & EASY FITTING GUARANTEED
£164.99 inc postage LATEST SMOKE HEAT DETECTOR HMO WIRELESS FIRE ALARM
Suitable for small businesses, homes, rented properties, etc Battery powered Smoke detectors/Break glass call points All batteries are included
Extras Also available: Wireless break glass call points £35.00 Wireless smoke detectors £14.00 Wireless heat detectors £14.00 Wireless Gas leakage detectors £14.00 Keyfobs £12.00 Sounders £25.00 Lcd control unit £120.00 Wireless Co leakage detector £14.00
BS standards on all smoke & heat detectors The system is an ‘easy to install’ system What does the system work: When smoke is detected by the smoke detectors, it sends a signal to the main unit which sounds its siren Operating the system After you have fixed all the accessories, you can arm the system using the provided keyfobs (press LOCK) . The alarm will beep. You can test the system by pressing the ‘test’ button on the smoke detector. The system will go OFF & you need to press the UNLOCK button on the keyfob to disarm it. In case of emergency, you can use the ‘break glass call point’ or the PANIC button on the keyfob. Fixing the siren The siren receives a wireless signal from the detectors. Locate it near a socket as it needs power supply. You can stop the siren from sounding using the keyfobs. They respond to signals from the ‘break glass’ , the keyfobs & the detectors It’s that easy! - Suitable for home & business use - We can supply extra detectors/break glass/sirens/gas leakage & Cod etectors/keyfobs/etc please enquire if you need any extras -NICE & EASY FITTING GUARANTEED No interference Guaranteed each alarm has unique code
CCTV, ALARMS, INTERCOMS, FIRE ALARMS 